Tektronic https://www.tektronic.dk Fri, 17 Apr 2026 04:35:31 +0200 GaN, USB-C PD and Quick Charge - what do they mean, and why should you care? When you look at modern chargers and cables, you will often see terms like GaN, USB-C PD and Quick Charge. They can be confusing, but they tell you something very practical about charging speed, how versatile your USB-C PD charger is, and how compact a charger can be. Below you get a clear, everyday explanation, so you can choose the right setup and avoid common issues like slow charging, the wrong cable choice and devices getting unnecessarily warm. What is USB-C PD? USB-C PD stands for USB-C Power Delivery. It is a charging standard that allows the charger and the device to communicate and agree on the right voltage and current. This is why USB-C PD can be used for much more than basic phone charging. Power Delivery is what makes a USB-C charger suitable for phones, tablets and many laptops. In practice, this means you can often use one USB-C PD charger for several devices, as long as they support USB-C PD. For many people, that is the biggest advantage: fewer chargers, less clutter and more flexibility at home and on the go. What is GaN, and why is a GaN charger often smaller? GaN is short for gallium nitride. It is not a charging standard, but the technology used inside the charger. Many traditional chargers use silicon, while GaN components can operate more efficiently. The result is often that a GaN charger can be made smaller and lighter at the same power level. For you, that typically means three benefits: A more compact charger - easier to carry and takes up less space in a wall outlet. Higher efficiency - more of the power is delivered to your device, with less energy lost as heat. High power in a small form factor - for example, 65 W in a nano charger can be a big advantage if you want to use it as a USB-C PD laptop charger. What is Quick Charge 3.0? Quick Charge 3.0 is a fast-charging technology typically used on USB-A ports. While USB-C PD primarily belongs to USB-C, Quick Charge can be relevant for many devices that charge from USB-A. On a charger that includes both USB-C and USB-A, you can often charge different device types at the same time. This is especially useful if you have a mix of newer and older devices in your household, or if you want to charge multiple devices simultaneously from one charger. What is the correct term: PD, GaN or PD GaN? The short answer is: USB-C PD describes the charging standard and compatibility. GaN describes the charger technology that often enables a smaller, more efficient design. USB-C PD GaN is commonly used as a combined term for a compact fast charger that supports Power Delivery and is built with GaN technology. If you see PD GaN in a product name, it is usually a short way of saying: this is a USB-C PD charger, and it uses GaN technology to be compact and efficient. Multiport chargers: why more ports means more flexibility A multiport USB-C charger makes it easier to charge several devices at once. For example, you can charge a laptop via USB-C Power Delivery, a phone via USB-C, and an older accessory via USB-A at the same time. In many setups, one charger can replace multiple older chargers and create a cleaner setup at home, at work and while travelling. Why the cable matters just as much as the charger Even the best charger cannot perform properly if the cable cannot keep up. A cable is not just a cable. If you want stable charging and fewer everyday problems, cable quality and construction matter. At higher power levels, a poor cable can lead to slower charging, an unstable connection or, in the worst case, overheating. Durable cables: fewer failures and less frustration Many cheap cables fail near the connector. That is why it makes sense to choose cables with: A braided textile jacket that helps protect against wear. Metal connectors that often feel more solid and durable. Strain relief on both ends to reduce stress where the plug meets the cable. If you want to take advantage of fast charging, a USB-C to USB-C 60W cable is a strong choice, especially when it is built for everyday durability. Which cable length should you choose? Length is not just a detail. It makes a real difference in daily use: 0.5 m is ideal for a car, a power bank or a tidy desk setup. 1 m is the classic all-round length for most charging situations. 2 m is great for sofa, bed and home office setups where the wall outlet is further away. With the right length, you get a cleaner setup and avoid a cable that is either too tight or lying in a big loop. How to build a charging setup that works in real life If you want a solution that is fast, flexible and durable, a good rule of thumb is: Choose a USB-C PD GaN charger with enough power for your devices, for example if you want a USB-C PD laptop charger. Use a quality USB-C cable that matches the charging requirements and holds up to daily use. Select the cable length that fits where you actually use your devices. Ready to upgrade? A compact GaN charger with USB-C PD can deliver faster charging and replace multiple older chargers. Combine it with a durable USB-C to USB-C 60W cable with a braided textile jacket, metal connectors and strain relief, and you get a setup that works better and lasts longer. Explore our selection of GaN chargers, multiport USB-C chargers and durable USB-C cables, and choose the combination that matches your power needs, number of ports and preferred cable length.]]> https://www.tektronic.dk/en/blog/p-gan-chargers-explained-usb-c-pd-ports-and-the-right-cables https://www.tektronic.dk/en/blog/p-gan-chargers-explained-usb-c-pd-ports-and-the-right-cables Sat, 20 Dec 2025 01:58:52 +0000 admin 0 Several TVIP mediacenter boxes are delivered without built-in WiFi. A good example is the TVIP 710, which only comes with an Ethernet port. While wired network is the most stable, in many homes it is more practical to add wireless WiFi connectivity. The solution is a USB WiFi adapter, but not all dongles will work with TVIP boxes. Why you cannot use just any USB dongle TVIP mediacenters need the correct drivers and chipsets supported by their firmware. Cheap USB sticks often look the same but use unsupported Realtek chips. To avoid frustration, it is best to choose an adapter officially tested with TVIP firmware. Recommended: TVIP USB WiFi Adapter Rev.2 TVIP USB WiFi Adapter Rev.2 is built on the Realtek RTL8811CU chipset, which is officially supported on several TVIP models and firmwares. Dual band WiFi – 2.4 GHz and 5 GHz Up to 600 Mbit/s throughput External antenna for stronger and more stable signal than nano dongles Supported by both Linux Qt and Android TVIP firmware Supported TVIP models With the RTL8811CU chip (Rev.2) support is available from these firmware versions: Linux Qt 5.0.36+: TVIP S-Box v.60x, v.52x, v.53x Android firmware: TVIP S-Box v.7xx (incl. TVIP 710) External antenna advantage Compared to nano models, the external antenna may take up more space but delivers significantly better range and signal quality. This means fewer dropouts and more stable streaming, even if your TVIP box is placed further from the router. Getting started Update your TVIP box to the latest firmware. Connect the adapter to a free USB port. Go to network settings, enable WiFi, and connect to your router. Use 5 GHz for highest speeds, or 2.4 GHz for longer range. Tips for best performance Place the antenna freely, away from metal and closed cabinets. Choose 5 GHz if close to the router; 2.4 GHz if you need more coverage through walls. Change WiFi channel if there is interference from neighbors. FAQ Does it work with TVIP 710? Yes, the entire 7xx series is supported on Android firmware. Can I use any USB WiFi stick? Usually not. Only models with the correct Realtek chipsets are guaranteed to work. Is Ethernet still better? A wired connection remains the most stable, but Rev.2 delivers one of the best wireless alternatives available. More info See specifications and availability here: TVIP USB WiFi Adapter Rev.2.]]> https://www.tektronic.dk/en/blog/p-tvip-usb-wifi-adapter-rev2-rtl8811cu-600mbit-dual-band-24-5ghz https://www.tektronic.dk/en/blog/p-tvip-usb-wifi-adapter-rev2-rtl8811cu-600mbit-dual-band-24-5ghz Sat, 27 Sep 2025 13:03:26 +0000 admin 0 Breaking News: Formuler Z12 Ultra BT3 – High-End Streaming Without Limits Are you the type who always wants the fastest box, the sharpest picture, and the most responsive experience? The brand-new Formuler Z12 Ultra BT3 is built for first movers, tech enthusiasts, and demanding users who expect nothing but top performance. With 4 GB DDR4 RAM, a massive 128 GB of internal storage, and 4K at 60 fps, the Z12 Ultra BT3 sets a new standard for premium streaming devices. Next-Level Performance: Realtek RTD1319C + 4 GB DDR4 + 128 GB eMMC At the heart of the Z12 Ultra BT3 lies the powerful Realtek RTD1319C quad-core SoC, combined with 4 GB DDR4 @2400 MHz and 128 GB eMMC storage. This results in dramatically faster app launches, smooth navigation, and plenty of space for apps, recordings, and media – all built right into the device. 4K, HDR10+, Dolby Vision and Dolby Atmos The Z12 Ultra BT3 delivers 4K60 playback with advanced 4K HDR decoding – including HDR10+ and Dolby Vision – plus Dolby Atmos for immersive sound. It brings a true cinema experience into your living room with deeper contrast, richer colors, and precise lighting control. If you have a compatible TV and content, the difference is instantly visible. Quick Media Switching (QMS): No More Black Screens Between Frame Rate Changes With QMS, you can say goodbye to annoying blackouts when switching between content with different frame rates – as long as your TV also supports QMS. This creates a seamless viewing experience, especially when jumping between different apps and media sources. A QMS-compatible TV is required. Wi-Fi 6E Tri-Band 2x2, Bluetooth 5.2, and Gigabit Ethernet Lag and buffering are a thing of the past. The Z12 Ultra BT3 features cutting-edge Wi-Fi 6E (AX) 2x2 tri-band for higher speeds and lower latency, Bluetooth 5.2 for accessories, and Gigabit Ethernet for rock-solid wired performance. Perfect for households with multiple devices streaming at once. AV1, HEVC, and Wide Codec Support + Widevine L1 Enjoy full modern codec support, including AV1, HEVC/H.265, and H.264. Combined with Widevine L1 DRM, this ensures compatibility with a wide range of premium streaming services and highly efficient playback. All the Ports You Need – Including microSD Expansion The back panel has everything you actually need: USB 3.0, USB 2.0, HDMI, Gigabit LAN, optical S/PDIF, and a microSD slot for expandable storage. Power consumption is low (max 12 W; standby max 0.5 W). Dimensions: 135 x 100 x 24 mm. GTV-BT3: A Remote That Feels Truly Premium The new GTV-BT3 Bluetooth Voice Remote features backlit buttons, a handy Find My Remote function, IR learning for controlling your TV, programmable shortcut buttons, and an ergonomic design. Brightness can be adjusted via the Formuler Remote app, so you won’t be blinded in dark environments. It’s a major quality upgrade for everyday use. MYTVOnline 3: Recordings, TimeShift, and Universal Search MYTVOnline 3 takes advantage of the 128 GB internal storage for recording and TimeShift, eliminating the need for external USB devices to store your favorite shows. It offers a modernized interface, universal search, flexible channel sorting, and multi-portal support – powerful software to match the high-end hardware. Built for Those Tired of Slow Boxes If you’ve been struggling with lag, sluggish menus, and endless waiting, the combination of RTD1319C, DDR4 memory, AV1 decoding, and Wi-Fi 6E will feel like a total upgrade to your home setup. Navigation is lightning-fast, channel zapping is instant, and 4K60 with modern HDR formats delivers next-level visual quality. Everything Included in the Box Inside the box, you’ll find the media receiver itself, the premium GTV-BT3 remote, a silicone remote cover, HDMI cable, power adapter, batteries, and a Quick Setup Guide – so you can get started right away. Key Technical Specifications CPU: Realtek RTD1319C quad-core – GPU: Mali-G57 MC1 RAM: 4 GB DDR4 @2400 MHz – Storage: 128 GB eMMC Video: 4K @ 60 fps, HDR10+, Dolby Vision, AV1, HEVC/H.265, H.264, and more Audio: Dolby Atmos Networking: Wi-Fi 6E (AX) 2x2 tri-band, Bluetooth 5.2, Gigabit Ethernet DRM: Widevine L1/L3 Ports: USB 3.0, USB 2.0, HDMI, microSD, optical S/PDIF, Gigabit LAN Power: 12 VDC/1 A, max 12 W, standby max 0.5 W Dimensions: 135 x 100 x 24 mm Who the Z12 Ultra BT3 Is Perfect For The first mover who wants the newest standards like AV1, Wi-Fi 6E, and QMS from day one. The quality seeker who demands Dolby Vision and Dolby Atmos in a single device. The impatient user who is tired of slow menus and limited storage – 128 GB internal storage and DDR4 make a real difference. Note: This device is sold without content. Tektronic always recommends using legal streaming services. Experience the Difference Yourself The Formuler Z12 Ultra BT3 is more than just another model – it’s a device that redefines what you can expect from premium streaming. With unmatched speed, massive storage, and cutting-edge picture quality, it’s perfect for anyone who demands the very best. Expected Q4 2025. Buy Formuler Z12 Ultra BT3 Now – Experience Next-Gen Streaming © Aloys Inc. All rights reserved. FORMULER, the FORMULER logo, MYTVOnline2, MYTVOnline3 and MYTVOnline+ are trademarks of Aloys Inc.]]> https://www.tektronic.dk/en/blog/p-formuler-z12-ultra-bt3-ndash-the-ultimate-4k-streaming-box-with-128gb-wi-fi-6e https://www.tektronic.dk/en/blog/p-formuler-z12-ultra-bt3-ndash-the-ultimate-4k-streaming-box-with-128gb-wi-fi-6e Mon, 22 Sep 2025 05:23:43 +0000 admin 0 How to Choose the Right Switch - Complete Guide Are you unsure which switch, rocker switch, or electrical contact you need for your project? Whether you are working on electronics, vehicles, machines, caravans, or DIY electrical installations, choosing the right type of switch is essential. This guide explains the difference between NC / NO contacts and the ON-OFF designations, so you can easily select the best solution. What Does NC and NO Mean? The most common switch contact types are called NC (Normally Closed) and NO (Normally Open). Here is the difference: NC - Normally Closed: The circuit is closed in its resting state. When the switch is activated, it breaks the circuit. NO - Normally Open: The circuit is open by default. Only when activated does it allow current to flow. NC contacts are often used in safety circuits or emergency stop switches, while NO contacts are common in light switches, push buttons, and start controls. Understanding ON-OFF and Momentary Functions Switches may be marked with designations like ON-OFF, ON-(OFF), (ON)-OFF, or (ON)-(OFF). These describe whether the switch holds its position or returns automatically when released. DesignationFunctionNormal PositionWhen Pressed ON-OFF Maintained switch (also known as latching) ON or OFF Stays in the selected position ON-(OFF) Momentary OFF ON Switches to OFF only while pressed (ON)-OFF Momentary ON OFF Switches to ON only while pressed (ON)-(OFF) Momentary both directions Neutral/middle Active only while pressed How to Choose the Right Switch Before choosing a switch or rocker, consider these points: What should the switch do? Do you need the power to be on by default (choose NC), or only when activated (choose NO)? Momentary or maintained? Should it return to its default position automatically (momentary), or stay in place (ON-OFF)? Voltage and current: Check the rating. For example: 12V/20A for cars, or 250V/15A for appliances. Shape and mounting style: Choose between round, rectangular, or LED-illuminated switches depending on the design. Product Examples from Our Range See all rocker switches and toggles 12 V switches for vehicles and caravans Switches with LED illumination Frequently Asked Questions (FAQ) What is the difference between a closed and open contact? Closed = power flows. Open = circuit is broken. Should I choose NO or NC? Choose NO if the circuit should activate only when the switch is pressed. Choose NC if the circuit should be live by default and break when activated. Can I use 12V LED switches in a car? Yes - we have many 12 V LED switches suitable for vehicles, boats, and campers. How do I install a rocker switch? Most are mounted in cutouts - for example, 20 mm round or 29x11 mm rectangular. Check the product specifications. Need Help? Feel free to contact us - we are happy to help you find the right switch for your application. Or go directly to our switch and rocker category to browse our full selection.]]> https://www.tektronic.dk/en/blog/p-no-vs-nc-switches-guide-to-momentary-and-maintained-types https://www.tektronic.dk/en/blog/p-no-vs-nc-switches-guide-to-momentary-and-maintained-types Thu, 19 Jun 2025 06:01:04 +0000 admin 0 Issues and Solutions for Qviart OG3 4K IPTV Box Below is a list of frequently reported issues and how to resolve them: No LED light on the Qviart display Check if the box is correctly connected to the power supply. Box does not work and screen is black You may have selected the wrong HDMI input on your TV. Press the input button on your TV remote and switch input until you find the one the Qviart box is connected to. Menus are visible but channels do not play Check your internet connection. Go to Menu, then Network, and select LAN configuration. If the IP address is 0.0.0.0, select DHCP and press OK. Make sure the box is connected to the internet and the router is working. Restart your router if necessary. Picture but no sound Turn up the volume on both the Qviart remote and your TV. Try using another HDMI port on your TV if needed. Cannot exit an app using the Exit button Press the Menu button on the remote to close the app. Channel switching is slow Qviart boxes normally switch channels very fast. If switching is slow, it is often due to your media source or server response. Check your network and IPTV provider performance. Box freezes when showing a channel Check if the issue occurs on other channels. If it happens on just one, the problem is likely with the stream from your IPTV provider. Contact them for support. Box starts slowly This can be normal after the first setup or update. Repeated slow startups may indicate issues with the power adapter or network. Time or clock is incorrect Go to Settings and Date/Time, and enable automatic synchronization. Select the correct time zone. Channels buffer or stutter Usually caused by poor internet connection or overloaded server. Use a network cable if possible and run a speed test. Remote control is not responding Check the batteries and only use high-quality new ones. Even new batteries can be weak, so check voltage if possible. Rechargeable batteries are not recommended. Use the IR extender if the box is hidden. No picture after firmware update Unplug the box for 30 seconds and plug it back in. If the issue persists, reset the box or reinstall the firmware using USB. Box only shows logo and then black screen This may indicate software failure. Perform a factory reset or reinstall firmware via USB. See guide on Tektronic.dk. Black screen or no sound even when box is on This may be due to an incompatible HDMI cable. Always use the included HDMI cable, which supports 4K and audio correctly.]]> https://www.tektronic.dk/en/blog/p-issues-and-solutions-for-qviart-og3-4k-iptv-box https://www.tektronic.dk/en/blog/p-issues-and-solutions-for-qviart-og3-4k-iptv-box Sat, 19 Apr 2025 04:42:15 +0000 admin 0 Why Strongly Shielded Antenna Cables Are Essential for Optimal TV and Radio Reception In a world full of wireless signals from WiFi, mobile towers and everyday electronics, ensuring a stable TV or radio signal is more important than ever. Picture dropouts, pixelation and sound interruptions are often caused by electrical interference – and the right cable can prevent that. What Causes Signal Interference? Signal interference happens when unwanted electrical noise enters the antenna cable. This is called electromagnetic interference (EMI) and it can come from sources such as: Mobile phones and 4G/LTE towers WiFi routers and Bluetooth devices Microwaves, LED lighting, and in-wall power lines How Does Shielding Help? A good antenna cable is more than just a wire. It's built with materials designed to block outside interference through multiple layers of shielding. Shielding effectiveness is measured in decibels (dB). The higher the value, the better the protection. A cable with 135 dB shielding offers excellent noise resistance. What Makes a Cable High-End? OFC copper (Oxygen-Free Copper): Ultra-pure copper ensures very low signal loss. 4-layer shielding: Aluminum foil and braided mesh block EMI effectively. Gold-plated connectors: Prevent corrosion and ensure stable contact. Strain relief and PVC: Protect the cable from bending damage. Recommended High-End Cables (135 dB, 4x Shielded) 1 meter antenna cable 2 meter antenna cable 3 meter antenna cable 5 meter antenna cable 10 meter antenna cable Frequently Asked Questions Is 135 dB shielding really necessary? Yes, especially in homes with many wireless devices or in urban areas. It ensures clean signal transfer. Does it work for both DVB-T2 and DVB-C? Absolutely. These cables support DVB-T2, DVB-C, DAB, and analog radio. What defines a high-end antenna cable? OFC copper, gold connectors and strong shielding make the difference in performance and durability. Want to learn more? View our full range in the antenna cable category here.]]> https://www.tektronic.dk/en/blog/p-why-high-quality-shielded-antenna-cables-matter-for-tv-and-radio https://www.tektronic.dk/en/blog/p-why-high-quality-shielded-antenna-cables-matter-for-tv-and-radio Wed, 16 Apr 2025 11:55:43 +0000 admin 0 QTV App on Qviart IPTV Boxes - Fast, Smooth and Easy IPTV Streaming QTV is the built-in IPTV streaming app found on Qviart IPTV boxes. In daily use it feels genuinely premium: lightning fast response, smooth navigation and an interface that is easy to learn from the very first click. Many apps can play IPTV, but QTV stands out as a polished, stable and highly refined solution that has been optimized and maintained over many years. A true multi-protocol IPTV player QTV is a real multi-protocol IPTV player. It handles Stalker (portal), M3U playlists and Xtream (Xtreme) setups quickly and reliably. Setup is straightforward, and the menu structure is logical and consistent. Below are a few screenshots from the configuration screens: Note: The Stalker setup is extremely flexible. You can, for example, enter the MAC address you want to present and emulate other well-known IPTV boxes. This can be useful if your provider requires a specific box type or device profile. Built for speed and stability QTV is designed with one core purpose: streaming that stays smooth. The app is tuned to deliver fast channel switching, responsive menus and stable playback with minimal lag and fewer interruptions from buffering. Because QTV is developed to work closely with Qviart hardware, the overall experience feels tight and reliable, even during heavy use. QTV is available across multiple Qviart platforms. The screenshots in this short overview are from the Qviart OGA Android TV box, but QTV is also available on Qviart Linux-based IPTV boxes, delivering the same high reliability, quick response and smooth playback.]]> https://www.tektronic.dk/en/blog/p-qtv-app-on-qviart-iptv-boxes-fast-smooth-and-reliable-iptv-player https://www.tektronic.dk/en/blog/p-qtv-app-on-qviart-iptv-boxes-fast-smooth-and-reliable-iptv-player Thu, 21 Mar 2024 05:45:23 +0000 admin 0 Qviart IPTV Media Player OG24K - Change MAC Address You can change the MAC address visible to your IPTV provider. This is not normally necessary but can be useful if your provider only supports MAG boxes. In such cases simply change the first three values of the MAC address to 00:1A:79 which identifies a MAG box. In other situations you may need two OG24K boxes with the same MAC address. Be aware that not all IPTV providers allow simultaneous use of multiple boxes. IMPORTANT The MAC address you provide to your IPTV provider is the one shown or entered in the app and NOT the physical MAC address on the IPTV box. Navigate to the QTV app. When the app is selected press the Option button on your remote control. A window will pop up. Navigate to Settings and press OK. You will now see a new window. Go to MAC and press OK. A keyboard will appear. Enter the MAC address you want to use. Be very precise. After entering press the blue button on your remote control to activate "Save and Exit". A confirmation window will appear. Go to Save and press OK on your remote control. If your IPTV provider has activated your subscription and your internet connection is stable and your MAC address is correctly entered you can now open the QTV app and start enjoying IPTV with your Qviart OG24K. Learn more about the OG24K IPTV Streaming box here.]]> https://www.tektronic.dk/en/blog/p-qviart-iptv-media-player-og-series-change-mac-address https://www.tektronic.dk/en/blog/p-qviart-iptv-media-player-og-series-change-mac-address Sun, 20 Nov 2022 17:11:04 +0000 admin Baic 0 Manual Software Update for Qviart OG and OG 4K IPTV Boxes Both Qviart OG and Qviart OG 4K IPTV receivers support automatic updates. However in some cases it may be convenient to update or flash the box manually. As with other Qviart functions it is easy. Here is a short guide: 1. Download the latest software 2. Copy the file to a USB stick 3. Insert the USB stick into your Qviart OG box 4. Go to Settings and then Firmware update 5. Select Upgrade method USB and click OK 6. Wait until the update completes 1. Download the latest software Get the latest software for your Qviart box. Be sure to select the correct model. You can download it here: Qviart official firmware 2. Copy the file to a USB stick Copy the downloaded file to a USB device. Most USB drives formatted in FAT32 are supported. Make sure the file is correctly saved on your USB stick. 3. Insert the USB stick into your Qviart OG or OG 4K box 4. Go to Settings then Firmware update 5. Select Upgrade method USB and click OK The box will ask if you want to update the firmware. Click Yes 6. Wait until the update completes It is important to let the update finish. Do NOT power off the box during the update After the update your Qviart box will be refreshed with the new firmware. Please note you will need to configure your IPTV settings again ]]> https://www.tektronic.dk/en/blog/p-manual-software-update-for-qviart-og-series-iptv-multimedia-boxes https://www.tektronic.dk/en/blog/p-manual-software-update-for-qviart-og-series-iptv-multimedia-boxes Tue, 03 Aug 2021 15:53:35 +0000 Bent Bo Christiansen 0 Qviart OG IPTV Boxes - Factory Reset If you have made too many changes or custom settings on your Qviart IPTV box a reset may be the solution. A factory reset restores the box to its original settings. This is also recommended if you have sold your Qviart IPTV box to ensure none of your personal data remains. Please note that all settings will be erased including streaming service configurations. After the reset you will need to re-enter URLs usernames passwords and other information. All Qviart OG family boxes follow the same reset method. Here is how to do it Select Settings Select Factory Reset Enter the reset code Press Yes Your Qviart IPTV box will now reboot quickly and display the setup screen: ]]> https://www.tektronic.dk/en/blog/p-qviart-og-iptv-boxes-factory-reset https://www.tektronic.dk/en/blog/p-qviart-og-iptv-boxes-factory-reset Sat, 27 Mar 2021 05:35:07 +0000 admin 0