Qviart Lunix3 4K DVB-S2 FBC

10802

New product

Lunix3 4K is a UHD (Ultra HD) DVB receiver with built-in DVB-S2 FBC tuner for receiving signals via satellite. Inside the Lunix3 4K is a very powerful processor with 12000 DMips, 4GB flash memory and 2GB working memory. Lunix3 4K has a firm DVB-S2 FBC twin tuner for receiving SAT signals and another plug-and-play tuner slot that can be retrofitted with a DVB-T / T2 HD tuner. Linux based E2, 4K, simultaneous recording of 8 transponders, option for SATA3 hard drive, USB 3.0 and CI slot, together with an attractive price, make Lunix3 4K a very exciting DVB box.

In Stock

1 749,00 kr

Data sheet

DVB TypeDVB-S2 4K UHD
Tuner1 x FBC DUAL DVB-S2 tuner for reception of satellite signals. Full Bandwidth capture
CI-slotYes
S/PDIF digital bitstream outYes
Processor, speed12000 DMIPS
RAM2 GB.
Flash4 GB Flash (EMMC)
ProcessorBroadcom 1.7 GHz 12K DMIPS
DecoderMPEG2/H.264 + H.265 HEVC
USB 2.0Yes
DiSEqCYes, DiSEqC 1.0, 1.1, 1.2, USALS
Web interface for PC and smartphoneYes
PVRYes, can record to USB storage media + option for HDD installation + network
EPG (Electronic program guide)Yes
VideotextYes
Automatic Channel searchYes
Network connectionYes,, 10/100 MBit/s og Gigabit kompatibel Ethernet Interface
OSLinux, OpenPli E2
Length300 mm.
Height60 mm.
width / Depth210 mm.
For reception ofDVB-S2 SAT 4K UHD
ColourBlack
RoHSYes
OSD languages availableMulti
USB 3.0Yes
HbbTVYes
Tuner slots2, 1 used + 1 empty

More info

Lunix3 4K is a UHD (Ultra HD) DVB receiver with built-in DVB-S2 FBC tuner for receiving signals via satellite. Inside the Lunix3 4K is a very powerful processor with 12000 DMips, 4GB flash memory and 2GB working memory. Lunix3 4K has a firm DVB-S2 FBC twin tuner for receiving SAT signals and another plug-and-play tuner slot that can be retrofitted with a DVB-T / T2 HD tuner. Linux based E2, 4K, simultaneous recording of 8 transponders, option for SATA3 hard drive. USB 3.0 and CI slot, together with an attractive price, make Lunix3 4K an exciting DVB box.

Qviart Lunix3 4K front design

On the front of the Lunix3 4K you will find a 12-digit Dot Matrix VFD display and behind the front panel there is a CI slot for mounting the CA module, a card reader and a USB connection. The operating system running on Lunix3 4K is Linux with OpenPli Enigma2. Of course, the device also has various connectivity options, such as HDMI-Out, USB 3.0, LAN, SPDIF, RCA and an RS232 port.

Operating systemQviart Lunix3 4K - built on Linux with Enigma2

The operating system, Linux with the OpenPli Enigma2 application, is a chapter in itself. Rather than developing a locked properitarian control system, the Lunix3 4K builds the digital receiver on Linux with the very popular and open OpenPli application. OpenPli is an application dedicated to DVB management, developed through Open Source, providing a very high degree of freedom. You will discover this very quickly. For example, you can adjust virtually all parameters in the Lunix3 4K UHD receiver. As OpenPli is an open source community, you will be able to get help quickly, find drivers, channel lists, tools and more. Take a closer look at OpenPli.org. Qviart Lunix3 4K can be modified with third party software. Software downloaded from the web and installed in Qviart Lunix3 4K quickly gives the box completely new and exciting functionality. Please note that we do not provide support for third-party software and that the use of third-party software may result in the termination of the warranty. Qviart Lunix is not "approved" by providers. The use of Linux with Enigma2, combined with a powerful hardware that Lunix2 4K is equipped with, provides high speed, stability and flexibility.

Connections Qviart Lunix3 4K TV box 

Lunix3 4K STB form Qviart - rear side connections

At the back of the Qviart Lunix3 4K DVB TV Set Top Box you will find connections that you will appreciate. You will find 2 x connection of the SAT signal to the DVB-S2 4K FBC tuner, video output, audio output, S/PDIF optical audio output, HDMI connector for monitor connection, USB 3.0 for connecting USB recording media, RS232 data port, 10/100 / Gigabit LAN connection, connection of power supply and ON / OFF switch. Furthermore, the blind cover for tuner extension is seen. Qviart Lunix3 4K can be extended with a DVB-T / T2 tuner.

Features for Qviart Lunix3 4K STB

Qviart Lunix3 4K features

Reviews

Grade 
04/13/2019

Super !

Hurtig og fuldt ud på højde med langt dyrere bokse som jeg også har prøvet.

    Write your review!

    Write a review

    Qviart Lunix3 4K DVB-S2 FBC

    Qviart Lunix3 4K DVB-S2 FBC

    Lunix3 4K is a UHD (Ultra HD) DVB receiver with built-in DVB-S2 FBC tuner for receiving signals via satellite. Inside the Lunix3 4K is a very powerful processor with 12000 DMips, 4GB flash memory and 2GB working memory. Lunix3 4K has a firm DVB-S2 FBC twin tuner for receiving SAT signals and another plug-and-play tuner slot that can be retrofitted with a DVB-T / T2 HD tuner. Linux based E2, 4K, simultaneous recording of 8 transponders, option for SATA3 hard drive, USB 3.0 and CI slot, together with an attractive price, make Lunix3 4K a very exciting DVB box.

    Related Products

    TOP