Digital Caliper 150 mm (6 inch) - DIN 862 - 0.01 mm

150 mm digital caliper for fast, repeatable measurements

A 150 mm (6 inch) digital caliper is often the most practical choice because it balances precision with easy one-handed use. It fits typical workshop tasks such as checking diameters, thickness, spacing and hole depths without switching tools.

What you can measure

• Outside dimensions such as thickness, width and outer diameter
• Inside dimensions such as inner diameter of holes, bushings and tubes
• Depth using the depth rod for holes, slots and recesses
• Step measurement for shoulder heights and level differences

How to measure more accurately

• Wipe the jaws and the workpiece clean before measuring.
• Close the jaws gently and press ZERO to set a clean reference.
• Use light, consistent pressure to avoid squeezing the part or tilting the caliper.
• For inside diameter, keep the jaws square to the hole and gently rock to find the true maximum reading.
• Use the locking screw to hold the measurement when you need a steady readout.

Resolution vs accuracy (simple explanation)

• Resolution is the smallest step shown on the display. This caliper reads in 0.01 mm increments.
• Accuracy describes how close the reading is to the true value. This model is specified to DIN 862 with an error limit of 30 micron (0.03 mm).

Key features

• Large 5-digit LCD for easy reading
• Unit switch: millimetres or inches
• ZERO function for relative measurements and quick comparisons
• Auto power-off after about 5 minutes to save battery
• Hardened stainless steel body and smooth sliding action

Technical specifications

• Measuring range: 0-150 mm (6 inch)
• Resolution: 0.01 mm / 0.0005 inch
• Accuracy: DIN 862, error limit 30 micron (0.03 mm)
• Measuring speed: up to 1.5 m/s
• Display: 5-digit LCD (approx. 12 x 38 mm)
• Material: hardened stainless steel
• Operating temperature: 0-40 C
• Battery: LR44, 1.5 V, replaceable

Package contents

• Digital caliper 150 mm
• LR44 battery (included)
• Retail box
• User guide (DE, EN)

Add to cart if you want a compact 150 mm digital caliper with DIN 862 specification and 0.01 mm resolution for precise workshop measurements.