Leave us a message


Sorry we are not available at the moment. Send us a message and we will get back to you soon. If asking for a specific product, please add productnumber or name in your message, thanks.

Leave us a message
Billigt tilbud nu - luk
Leaving already?
Get 3% off on your next purchase

Click the button below to unlock the deal and reveal a discount code to use at checkout.

HH120 STAB rotor
  • HH120 STAB rotor
  • HH120 Diseqc motorThe HH120 satellite dish motor (rotor) lets you rotate your dish and receive multiple satellite positions with one antenna. The motor is controlled via the same coax cable from your satellite receiver and supports DiSEqC 1.2 as well as USALS (Goto X) on compatible receivers.Note: Correct setup requires technical know-how and careful alignment (perfectly vertical mast, correct zero position, and accurate pointing). This product is intended primarily for technically skilled users and satellite enthusiasts.Ready for more satellites with one dish? Choose the HH120 for a stable motor solution for dishes up to 120 cm.Stab
  • HH120 STAB rotor
  • HH120 STAB rotor
  • HH120 STAB rotor
  • HH120 STAB rotor

HH120 Diseqc motor

02001
kr.1,795.00
Tax included
1795

The HH120 satellite dish motor (rotor) lets you rotate your dish and receive multiple satellite positions with one antenna. The motor is controlled via the same coax cable from your satellite receiver and supports DiSEqC 1.2 as well as USALS (Goto X) on compatible receivers.

Note: Correct setup requires technical know-how and careful alignment (perfectly vertical mast, correct zero position, and accurate pointing). This product is intended primarily for technically skilled users and satellite enthusiasts.

Ready for more satellites with one dish? Choose the HH120 for a stable motor solution for dishes up to 120 cm.

Quantity
Out-of-Stock

Customer Icon 2 customers are currently viewing this article.
  • Ecommerce Europe Trustmark certified Ecommerce Europe Trustmark certified
  • Fast shipping to all EU countries Fast shipping to all EU countries
  • Easy RMA and returns Easy RMA and returns
  • Secure payment - protected by strong SSL encryption Secure payment - protected by strong SSL encryption

Motorised satellite dish rotor for multiple satellite positions

With the HH120 you can rotate your satellite dish, allowing you to switch between different satellite positions without installing multiple dishes. The motor works with your receiver through the coax cable and is controlled from the receiver's DiSEqC menu. If your receiver supports USALS (Goto X), it can calculate satellite positions automatically based on your latitude and longitude.

For technically skilled users and satellite enthusiasts

A dish motor offers great flexibility, but it also requires correct mounting and precise alignment. Expect to spend time on setup and fine tuning. The best results are achieved when the mast is perfectly vertical, the motor is correctly set to zero, and the dish is accurately aligned.

Key benefits

  • Supports DiSEqC 1.2 and USALS (Goto X) on compatible receivers
  • Control and power via coax cable (13/18 V DC from the receiver)
  • Store and recall satellite positions through the receiver menu
  • Suitable for dishes up to 120 cm and up to 17 kg
  • Programmable limits and fine adjustment for precise positioning
  • Robust outdoor operation with a wide temperature range

Mounting and operation (quick notes)

  • The mast must be 100% vertical (use a spirit level). This is critical for stable reception across multiple positions
  • Confirm the motor zero position during initial setup
  • Use quality coax for long cable runs to reduce voltage drop
  • Seal outdoor F-connectors properly, for example with self-amalgamating tape

Technical specifications

Dish capacity Up to 120 cm / up to 17 kg
Rotation range Approx. plus/minus 65 degrees
Speed Approx. 0.7 degrees/sec at 18 V and 0.4 degrees/sec at 13 V
Control DiSEqC 1.2 and USALS (Goto X)
Power 13/18 V DC via receiver
Current draw Approx. 30 mA standby, 190 mA running, up to 350 mA at start
Mast diameter Approx. 50 to 76 mm
Motor weight Approx. 3.2 kg
Operating temperature Approx. -40 C to +80 C

What is included

  • HH120 satellite dish motor (rotor)
  • Mounting brackets and hardware for mast and dish arm

FAQ

What is the difference between DiSEqC 1.2 and USALS?
DiSEqC 1.2 is typically used to store and recall positions manually (store and goto). USALS (Goto X) calculates positions automatically after you enter your latitude and longitude in the receiver.

Is this a plug-and-play product?
No. A dish motor requires correct mechanical setup and accurate alignment. It is intended primarily for technically skilled users and satellite enthusiasts.

Want to expand your reception? With correct setup, the HH120 gives you access to multiple satellite positions using one dish.

Limited stock: Only a limited quantity remains. Once sold out, the item will be discontinued and will not be restocked.

Stab
02001

Data sheet

Manufacturer / responsible party in the EU
©2017 STAB S.r.l. via Seminiato, 79, 44034 Ambrogio, Italia R.I. Ferrara, VAT IT01460440389 Phone: (0039) 0532 830739 Fax: (0039) 0532 830609 E-mail: info@stab-italia.it

Download

chat Comments (0)