DiSEqC controlled motor for satellite dish.

DiSEqC controlled motor with metal gear for satellite dish.

Technical data:

Operating protocol  DiSEqC 1.2 + Go To X function
Horizontal turning 95° min.
Inclination (elevation) 75° max.
Maximum dish diameter ø 140 cm Alu.
Programmable positions 50 satellites
Maximum dish weight 14 kg for normal operation
Motor pole length (strait part) 120 mm
Bent pole diameter ø 40 mm
Rotation Speed (no load) 2,5°/s (H-18V) 2°/s (V-14V) ±25%
Rotation Speed (by load 85 cm dish) 2,3°/s (H-18V) 1,7°/s (V-14V) ±25%
Operating power supply 14/18V DC
Stand-by consumption 50 mA ±25%
Operating consumption  95-150 mA ±25%
Starting (max.) consumption 350 mA (80mS)
Operating temperature -35°C +70°C
Min. and max. relative humidity 35% to 100%
Connectors F type 7 mm
Connections sat coaxial cable 75 OHMS impedance 
Connection cable up to 30m inner conductor CU Ø 1,02mm R=22 OHMS/km
Connection cable up to 100m inner conductor CU Ø 1,13mm R=18 OHMS/km
Fine tuning step 0,36° min.
Maximum permissible wind speed At 90 cm / 140 cm dish 140 km/h / 80 km/h
Maximum permissible torque at rotation 15 Nm
Maximum static torque on idle 150 Nm
Control buttons on motor 2 for turning motor E/W
Dimension of packed into box 345 x 168 x 110
Weight with box 3,5 kg
Lifetime min. 50.000 cycles per 180° (90°E + 90°W)