Unicable II LNB, tilslut 32 SAT modtagere pr. LNB

Inverto Unicable2 LNB enables installations with up to 32 satellite receivers via a single cable. All SAT receivers receive signals simultaneously, without the use of multi switches. Supports both dynamic and static mode. Perfect for distributing SAT signals in multi-family homes, apartment buildings and for those with multiple tuners. The Unicable LNB requires your digital dish receiver to support Unicable or Unicable II (JESS).
 
The LNB is set to "dynamic mode" from the factory. You can switch to "static mode" using the programming tool (must be purchased separately). Programming is not required in the standard dynamic mode where 32 receivers are supported.
 
Dynamic mode (Default setting)
Up to 32 receivers / tuners connected via a single coax cable.
All devices have access to the full number of available transponders from the selected satellite. The receiving device must be EN50494 (CH0-CH7) or EN50607 (CH0-CH31) compliant.

Example: A total of 120 transponders are transmitted by the satellite. Each of the 120 transponders can be received by each of the up to 32 receivers/tuners installed in the house.
 
Static mode (adjustable via programming tool)
Up to 32 transponders from any number of receiver units, that is connected to a single coax cable. Here, 32 transponders are converted to 32 satellite IF frequencies using digital channel stack technology.

Example: An operator offers its service via 32 transponders. Any number of receiver units (older or unicable) can be connected via a single coax cable, each of which has access to each of the 32 transponders.

About Unicable 2:
Unicable2 LNB is powered by a connected SAT receiver or via an external power supply and the power supply if the connected SAT receiver is unable to supply enough power. Unicable2 LNB is backward compatible and complies with EN50494 and EN50607 standards. Communication takes place according to EN50494 and / or EN50607 and can be defined for each user band, enabling seamless integration in installations consisting only of EN50494 compliant or a mixture of next generation EN50494 / EN50607 compliant PVRs . For more information on the Unicable 2 technology and its benefits, see: www.inverto.tv/what-is-unicable-2

• Lower setup costs - no cascades.
• Cheaper LNB
• Single line signal - the signal for all satellite receivers is drawn in one and the same cable
• Connect up to 32 devices, all will have all transponders available independently of others.
• Backward compatible