Diesel pump 12V 25L - oil pump for immersion

Diesel pump 12V 25L - oil pump for immersion

With the 12V submersible diesel pump it is so easy to connect it to your vehicle's 12V battery with battery clamps or another suitable 12V power source and start pumping diesel. This versatile and reliable pump is designed to make refueling and transferring diesel fuel quick and hassle-free, wherever you are.

ATTENTION! It is recommended to use the 12V diesel pump intermittently. The maximum working time is 30 minutes, after which there must be a rest period of at least 30 minutes. Only use the 12V diesel pump for diesel oil with a viscosity of 2-5.35 cSt (at a temperature of 37.8 °C). Minimum flash point: 55 °C. Do not use the 12V diesel pump for anything other than diesel and oil.

The diesel pump is ideal for tractors, ships, power plants and other vehicles that use diesel. In addition, it can also be used in agricultural equipment, on construction sites, industrial equipment and emergency systems.

Properties:

- Supply voltage: 12 V

- Max. pump output: 25 l/min.

- Hose inner diameter: 19 mm (3/4")

- Max. pumping height: 3 m

- Power consumption: 60 W

- Revolutions per minute: 8500 rpm.

- Pump outer diameter: 52 mm

SAFETY REGULATIONS

- Check that all gaskets, couplings and hoses are clean and tight before use.

- Only use hoses and gaskets designed for diesel.

- Only use the 12V diesel pump for diesel.

- Avoid use in explosive environments.

- Check that the voltage of the battery matches the 12V diesel pump.

- Use personal safety equipment: Work gloves and safety glasses.

- Keep unauthorized persons away from the work area.

- Avoid overheating the engine.

- Children should not use the product.

12V Diesel and the oil pump are cooled by the oil it pumps. This is a common cooling method for many submersible pumps and similar equipment, where the pump working with a liquid receives cooling from the same liquid it is pumping. When the pump is in operation, the diesel oil circulates through the pump and thus acts as a coolant for the pump motor.

This cooling method is efficient and reliable under normal operating conditions and provides adequate temperature control to prevent overheating of the pump during use. It is important to ensure that the pump is used only with the recommended fluids and under the specified operating conditions to maintain adequate cooling and extend the life of the equipment.

With its compact size and simple operation, it is the ideal solution for fast and efficient transfer of diesel oil in any situation. Save time and effort with this reliable 12V diesel pump that delivers powerful performance and easy handling.